Engineering
Recommendations Index
Tecumseh Web Applications
ER-1
Line Sizing for Remote Systems (R-22 A/C Applications)
ER-2
Procedures Involving Processing and Start Up
ER-3
Cap Tube Sizing
ER-4
Application of Remotely Mtd. A/C and Refrig. systems with extended vertical
and Horiz.Lines.
ER-7
Time Delay Relay
ER-8
Refrigerant Line Sizing for Remote Systems
ER-9
Design Considerations for Good Oil Return on Commercial Systems
ER-10
Machine Compartment Design in Cabinets
ER-11
Refrigerant Strainers for Systems
ER-12
Engineering Recommendations for Accumulators
ER-13
Heat Pump Water Heaters
ER-14
Wiring Practices for External Overload Compressors
ER-15
Factory Test Pressures
ER-16
Compressor Cycling
Aug09
Alternate Refrigerant Position
RD-0003-E
Guidelines HCFC R22 to HFC Refrigerant Blends
RD-0005-E
Guidelines for Utilization of R407C
RD-0001-E
Refrigerant Matrix and Lubricants
RD-0002-E
R22 Alternate Refrigerant Selection Guide
Application Assistance Manual
ACC
Application Categories - Compressors
DRLM
Definition of RLA, LRA and MCC
IPRV
Internal Pressure Relief Valve
PSCS
Pressure Switch Control Settings
IFV
Internal Free Volume
PW
Product Weights
Service Data Book
ESP Electrical Service Parts Guidebook
TR-103 Compressor Service Handbook
GSSP 1 General Service Safety Precautions
MAI 2 Model and Application Information
CMCI 3 Compressor Motor and Component Information
SVC 4 Servicing
IRI 5 Installation and Replacement Information
OP 6 Operation
APX 7 Appendix
Model Numbers
MNNE
Model Numbers - Nomenclature Explained
|
